Product Features:
1. A new, water-based, long-lasting rust inhibitor, this product is a reddish-brown or light yellow, transparent liquid.
2. Easy to use and suitable for a wide range of applications.
3. Moderate pH value for strong rust prevention.
4. Long service life.
Application: Widely used for rust prevention of ferrous metal parts during in-process and inventory.
Instructions:
1. Dip-coating method: Both immersion and brushing are acceptable.
2. Before applying this product, clean the workpiece surface from any rust, oil film, or dirt.
3. After the cleaned workpiece has dried, soak it in the working solution for 1-10 minutes, gently shaking it. Remove and allow it to dry. This will form a uniform, continuous rust-proof protective film on the workpiece surface.
4. To maintain the working solution concentration, top up the stock solution as needed. 5. Working Fluid Concentration: Between process steps, the rust preventative can be prepared to a concentration of 10%-20% or other concentration range determined through testing. Dilute with tap water (distilled water is preferred) with a hardness below 100 PPM. In inclement weather, such as during humid or rainy seasons, the concentration should be increased to ensure effective rust prevention. For storage, rust preventative should be applied by dipping with the stock solution. 6. Sealing Rust-Proofed Parts: After the film forms on the surface of the parts, apply vapor-phase rust-inhibiting paper or other rust-proof packaging for optimal rust prevention. 7. Pay attention to coating blind holes and small grooves. Ensure the entire surface of the part is coated, leaving no blind spots.
Packaging: 25kg plastic drum, 200kg iron drum
Storage: This product should be stored in a dry, cool, and ventilated warehouse, away from open flames and heat sources. The recommended storage temperature is 5-35°C. Avoid direct sunlight and rain during storage and transportation. Under normal storage conditions, this product has a shelf life of one year.